Buildings

Product Applications

Our coatings ensure that the world’s structures retain their safety, impact and design credentials for many years to come.

Filter by

Products

356 Product Found
My Filters
    Lining
    Interline 961
    A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
    Primer
    Intergard 1032
    A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
    Primer
    Intergard 436
    A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 762
    A two component, styrene free, glass flake reinforced ambient cure polyester/acrylic copolymer coating.
    Chemical Resistant Lining
    Ceilcote 140 Flakeline
    Ceilcote 140 Flakeline is a heavy duty, glass flake reinforced, chemically resistant vinyl ester lining for protection of steel against aggressive chemicals in immersion service. Uses Ceilcote #2 Hardener.
    Surface Pre-Treatment
    Interplus 614
    A single component, water based rust remover gel, which can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.
    Reference
    Ceilcote 165 Grout
    Ceilcote 165 Grout is a carefully blended, three component vinylester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.
    Concrete Repair
    Intergard 2002
    A two-component, high solids and high build polyamine-cured epoxy.
    Intermediate
    Interdur 8842
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Structural Concrete- Repair and Protection
    Intercrete 4895 (formerly Monodex ICB)
    A single component, low VOC, elastomeric, intermediate, water-based crack-bridging filler and coating which is designed for use where enhanced crack-bridging properties are required. It is capable of bridging existing cracks up to 1mm and also acts as a filler for pores, cavities and blowholes.
    Supplied as a ready-mixed paste for ease of use, it is highly cost-effective and can be applied straight onto the substrate as no primers are required
    Passive Fire Protection
    Chartek 8E
    Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
    Lining
    Devmat 100
    Devmat 100 is a thick-film, 100% solids reinforced, proprietary formulated epoxy-based internal lining.
    Primer
    Interprime 1018
    A one component, fast drying, high performance, universal alkyd primer.
    Primer
    Intergard 235
    A high build, high solids, low VOC two component epoxy primer.
    Fetching the data, please wait...