Water and Waste

Product Applications

Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.

Filter by

Products

213 Product Found
My Filters
    Lining
    Interline 961
    A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
    Intermediate
    Interdur 8842
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Primer
    Intergard 235
    A high build, high solids, low VOC two component epoxy primer.
    Primer-Finish
    Interbuild 1094
    Interbuild 1094 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 0.5mm to 1mm. Interbuild 1094 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
    Lining
    Interline 975P
    A two component, solvent free, heavy duty epoxy tank lining.
    Chemical Resistant Lining
    Ceilcote 222GF Flakeline
    Ceilcote 222GF Flakeline is a novolac vinyl ester resin system with graphite fillers, which exhibits excellent resistance to both aliphatic and aromatic organic and inorganic acids, including hydrofluoric acid.
    Lining
    Interline 967
    A two component, solvent free glass reinforced epoxy laminate system.
    Temperature Resistance
    Intertherm 3350
    A single component, spray applied insulation coating based upon waterborne acrylic technology, Intertherm 3350 is suitable for use on substrates operating up to 177°C (350°F). Combining superior thin film insulation performance with easy application, Intertherm 3350 can improve productivity and minimize energy loss. Where suitable, Intertherm 3350 provides a seamless adherent insulating film enabling the removal of equipment from a corrosion under insulation (CUI) inspection program and mitigating a facility's overall CUI exposure.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Lining
    Bar-Rust 234P
    Bar-Rust 234P is a thick-film, 100% solids, proprietary formulated epoxy based low temperature cure tank lining.
    Other
    Interline 955 MR System
    Interline 995 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
    In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Structural Concrete- Repair and Protection
    Intercrete 4851
    A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the protection of concrete substrates.Intercrete 4851 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative.
    Intermediate
    Intercure 1040
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Other
    Interline 984 MR System
    Interline 984 MR is a reinforced chemcial resistant system. The system features a 100% volume high solids, two componentepoxy phenolic topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Fetching the data, please wait...