Lining
Interline 961
A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
BACK TO PRODUCTS
Water and Waste
Product Applications
Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.
Filter by
Products
My Filters
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Primer
Intercure 1039
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.
Chemical Resistant Lining
Ceilcote 232 Flakeline
Ceilcote 232 Flakeline is a flake filled novolac vinyl ester coating which exhibits excellent resistance to both aliphatic and aromatic organic solvents and to concentrated organic and inorganic acids.It offers outstanding chemical resistance with quick turn around for service and also high temperature resistance. Uses Ceilcote #2 Hardener.
Structural Concrete- Repair and Protection
Intercrete 4805 (formerly Monopour)
A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4805 is a flowing grout with a maximum aggregate size of 2.5mm for application thicknesses up to 100mm.
Finish
Interfine 629
A two component, isocyanate-free, high durability acrylic topcoat, Interfine 629 is ideal for existing structures and new construction where a high gloss, weather resistant finish is required to maintain aesthetics. Its low temperature cure down to 2°C (36°F) and fast drying properties help to optimize application time, enable fast handling and increase productivity.
Primer
Ceilcote 680 Primer
Ceilcote 680 Primer is a low viscosity epoxy primer for steel and concrete, with low temperature cure and a degree of tolerance to surface moisture.
Primer
Intercure 202
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.
Chemical Resistant Lining
Ceilcote 2000 Flakeline
Ceilcote 2000 Flakeline is a high performance, flake filled epoxy novolac coating that is designed to provide maximum resistance to 98% sulphuric acid.
Chemical Resistant Lining
Ceilcote 242LSE flakeline
CEILCOTE 242 LSE Flakeline coating is a low surface energy, flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
Passive Fire Protection
Interchar 1120HY
A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263.
Primer-Finish
Intercure 99NA
Intercure 99NA polyaspartic technology is applied as a single coat at 150-250 microns (6-10 mils) direct-to-metal using standard application equipment, reducing application time and labour costs compared to two coat applications in moderately corrosive environments (up to C3, ISO 12944-2).Intercure 99NA is a low VOC, high solids, rapid cure primer/finish, offering excellent anticorrosive protection and long term colour and gloss durability – a combination that cannot be achieved with alternative fast cure, single coat primer finishes.Intercure 99NA may also be specified as a high build, durable intermediate/finish over approved anti-corrosive primers for more aggressive environments, i.e. ISO 12944 C4 and C5M.