Water and Waste

Product Applications

Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.

Filter by


212 Product Found
My Filters
    Devlac 1433
    A quick drying, high gloss alkyd enamel available in a wide range of colours. *Please note this product is only available in North America.
    Structural Concrete- Repair and Protection
    Intercrete 4851
    A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the protection of concrete substrates.Intercrete 4851 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative.
    Intercure 1040
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Interline 984 MR System
    Interline 984 MR is a reinforced chemcial resistant system. The system features a 100% volume high solids, two componentepoxy phenolic topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Interprime 406
    Interprime 406 is a fast drying alkyd primer containing zinc phosphate anti-corrosive pigmentation, designed for application to all types of steel surfaces.This primer is characterised by good anti-corrosive properties, easy application and the ability to protect hand cleaned steel.
    Interdur 8817
    A two component, metallic zinc rich epoxy primer, which complies with the composition requirements of Chinese Chemical Industrial Standard HG/T3668.
    Enviroline 222
    A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology.
    Enviroline 2900LV
    A two component, epoxy phenolic lining system, with low viscosity.
    Intergard 2575
    A two component, high solids, low VOC, fast-curing epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection. Suitable for overcoating within 2 hours under common climatic conditions. Early handling properties make this an ideal primer for speeding up production and throughput.
    Interline 9670
    A two component, solvent free glass reinforced epoxy laminate system.
    Interprime 741
    A revolutionary reinforced PVB single pack primer combining in one application etching and pre- treatment qualities for the preparation of ferrous and non-ferrous surfaces. This product has UK welding and Health certificates
    Structural Concrete- Repair and Protection
    Intercrete 4820
    Supplied as a single component, fibre reinforced, waterproof screed or fairing coat.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative.
    Intercryl 530
    A single component water borne finish formulated on weather resistant acrylic copolymer technology.
    Surface Pre-Treatment
    Interplus 4101
    A single component, water-based rust remover / cleaner gel. Clean Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Temperature Resistance
    Intertherm 715
    A functional coating for identification of hot spots and internal insulation failures, Intertherm 715 exhibits a visual color change in response to temperature rise. Based upon modified silicone technology, Intertherm 715 is a single component coating ideal for use on reaction vessels on chemical and petrochemical sites as a warning of dangerous temperature increases.
    Fetching the data, please wait...