Water and Waste

Product Applications

Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.

Filter by

Products

210 Product Found
My Filters
    Primer
    Intergard 251
    The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site. Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
    Lining
    Bar-Rust 233H LV
    A low VOC, high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating.
    Lining
    Interline 982
    A two component epoxy holding primer.
    Chemical Resistant Lining
    Ceilcote 232 Flakeline
    Ceilcote 232 Flakeline is a flake filled novolac vinyl ester coating which exhibits excellent resistance to both aliphatic and aromatic organic solvents and to concentrated organic and inorganic acids.It offers outstanding chemical resistance with quick turn around for service and also high temperature resistance. Uses Ceilcote #2 Hardener.
    Lining
    Enviroline 376F-30
    A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology.
    Structural Concrete- Repair and Protection
    Intercrete 4807 (formerly Ttiefill)
    A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.
    Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
    Structural Concrete- Repair and Protection
    Intercrete 4842
    A two component, polymer modified, elastomeric cementitious coating for the protection of concrete and masonry which exhibits cracking and where further movement is expected. *Selective Countries Only - Please contact your local representative.
    Structural Concrete- Repair and Protection
    Intercrete 4805 (formerly Monopour)
    A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4805 is a flowing grout with a maximum aggregate size of 2.5mm for application thicknesses up to 100mm.
    Chemical Resistant Lining
    Devchem 256
    A chemical resistant tank lining and protective coating for highly corrosive environments.
    Finish
    Interthane 990V
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
    Finish
    Interfine 629
    A two component, isocyanate-free, high durability acrylic topcoat, Interfine 629 is ideal for existing structures and new construction where a high gloss, weather resistant finish is required to maintain aesthetics. Its low temperature cure down to 2°C (36°F) and fast drying properties help to optimize application time, enable fast handling and increase productivity.
    Filler
    Devfil 145
    A two-component epoxy filler and surfacer for interior and exterior concrete and masonry. *Please note this product is only available in North America.
    Passive Fire Protection
    Interchar 1120
    Interchar 1120 will maintain architectural aesthetics for fire resistance periods up to 120 minutes and it is independently tested for up to three hour fire resistance. Interchar 1120 is a single component, low VOC waterborne intumescent coating designed for onsite application to interior exposed structural steel.
    Finish
    Intercure 4500
    A low VOC, high solids, rapid cure primer/finish, Intercure 4500 offers excellent anticorrosive protection and long term aesthetic durability. Based upon innovative polyaspartic resin technology, Intercure 4500 can be applied as a single coat direct-to-metal or over suitable primers for more corrosive environments using standard application equipment. Its rapid cure characteristics (even at low temperatures) help to further optimize application time and reduce labor costs.
    Primer-Finish
    Interbuild 1094
    Interbuild 1094 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 0.5mm to 1mm. Interbuild 1094 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
    Fetching the data, please wait...