Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.
Specifically designed for the filling of tieholes formed by formwork bolts in new construction, particularly where a rapid setting, durable, waterproof mortar is required. Can also be used for sealing grout holes and voids around fixings in pre-cast elements. Intercrete 4807 sets in 30 minutes at 20°C, yielding a durable, high strength mortar which provides a waterproof seal which withstands 10 bar water pressure after only 72 hours curing. Non-toxic when cured and WRAS approved for use incontact with potable water. CE-marked in accordance with BS EN 1504-3 Class
R4. Suitable for repair methods 3.1, 7.1, 7.2 as defined
by BS EN 1504-3.
Specifically designed for the structural repair of large areas of concrete and heavy duty applications beneath base plates, plinths and stanchion bases where a pourable or flowable material is required. Intercrete 4806 utilises a dual expansion mechanism which compensates for shrinkage in the plastic and hardened state and cures rapidly to give high early and long term strength development, enabling quick reinstatement. The dense matrix provides excellent protection from the ingress of acid gases, moisture and chlorides.
Specifically designed for arresting water seepage and infiltration under pressure through cracks, joints, and voids in concrete and masonry.
Intercrete 4809 sets in 2 minutes at 20ºC, yielding a durable, high strength mortar which provides rapid sealing and jointing in and around pipework or for forming fillets in tanking situations.
Designed to enhance the bond between high porosity concrete and Flexcrete Repair Mortars. Intercrete 4812 further increases the adhesion of Flexcrete Repair Mortars and prevents rapid drying at the concrete interface on porous backgrounds with high suction.
Ultimately designed to prime substrates and promote adhesion prior to the application of one of both decorative and protective membranes. Intercrete 4813 is a single component product and is compatible with a wide range of ferrous, non-ferrous metals and difficult to adhere to substrates including steel, lead, zinc, aluminium, copper, flashband, bitumen paint and roofing felt. It is ideally suited for use in combination with the Intercrete range of cold applied liquid roofing system for the anti-corrosion protection of roofs with metallic protrusions.
Designed to provide protection from water and oil ingress and enhance freeze/thaw resistance whilst enabling easier removal of oil, grease, paint, graffiti, etc. Used on substrates such as concrete, brick, masonry and stone. As supplied, it is ideally suited to the treatment of car park decks and other trafficked areas, and it may be diluted on-site to provide a more cost-effective solution for the treatment of walls. Suitable for surface protection systems principles 1.1 and 2.1 as defined in BS EN 1504 Part 2.
Designed as a cosmetic quality fairing coat and thin screed render for filling minor blow holes, surface imperfections and levelling concrete surfaces to provide a fair faced finish. Suitable for repair methods 3.1, 3.3, 7.1, 7.2 as defined by BS EN 1504-3. CE-marked in accordance with BS EN 1504-3 Class R2.
Designed as a one coat render for spray or trowel application on external and Internal walls as described in EN988-1. Intercrete 4823 is fibre reinforced to provide excellent tensile strength, impact strength and the ability to resist cracking. The dense matrix provides excellent protection from the ingress of acid gases, moisture and chlorides. Can be applied at thicknesses from 5-50mm in a single coat which greatly reduces application costs. Highly waterproof resisting 7 bar hydrostatic pressure on both the positive and negative side when applied at 10mm thickness. Conforms to the requirements of BS 8102:2009, the Code of Practice for Protection of Structures Against Water from the Ground, providing the optimum ‘Grade 3’ completely dry environment.
For the filling of blow holes and small surface defects in precast and in-situ concrete to produce an aesthetic durable finish. Suitable for repair methods 3.1 as defined by BS EN 1504-3. Fine grade, polymer modified mortar for filling blow holes and minor surface defects. Available in Grey and White versions to enable colour matching with the parent concrete. CE-marked in accordance with BS EN 1504-3 Class R1. Suitable for repair methods 3.1 as defined by BS EN 1504-3.
A uniquely formulated cementitious material for sealing the surface gap at the interlock or clutch between piles prior to the application of a Intercrete cementitious anti-corrosion coating. Materials are pre-packaged in a convenient and easy to handle size, requiring only mixing on site. A unique blend of surfactants enables easy application with a pointing gun. Gel structure breaks down under shear to ensure complete filling.
Intercrete 4844 is self-priming, hydrates to provide an alkaline environment which chemically reacts with the substrate to accelerate the re-passivation of steel, providing excellent adhesion to steel and is tolerant to lower levels of steel preparation, including chloride contamination.
Corrosion & fire protection coatings for buildings
Coatings for abrasive and corrosive environments