Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.
A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent and siloxane emulsion. Intercrete 4816 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Intercrete specialist membranes. Intercrete 4816 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
Designed as a versatile, two component cementitious coating / wearing screed for levelling and waterproofing tamped or uneven concrete floors, or floors with no waterproofing membrane. Intercrete 4853 can be used as a waterproof cementitious coating, an underlayment or as a wearing screed to provide resistance to abrasion and trafficking, including level and sloping substrates and ramps.
Can be applied in thicknesses ranging from 0 - 60mm Suitable for application to saturated substrates, or floors with no waterproofing membrane, without risk of blistering.
Specifically designed for rapid cosmetic repairs to in-situ and pre-cast concrete where repairs need to be colour matched to the parent concrete to provide a highly aesthetic finish. Intercrete 4808 demonstrates rapid strength development, achieving over 9MPa in 2 hours. Ultimate physical properties of cured materials are similar to base concrete.Not suitable for repairs deeper than 25mm. CE-marked in accordance with BS EN 1504-3 Class R1. Suitable for repair methods 3.1 as defined by BS EN 1504-3.
Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
Chartek 1960CSP is a unique intumescent material that provides combined hydrocarbon fire protection and insulation against cryogenic liquid exposure. A high build, solvent free, two pack epoxy material, Chartek 1960CSP also provides excellent corrosion protection and blast resistance
Specifically designed be embedded in the INTERCRETE range of cementitious coatings to provide a highly flexible impermeable seal over ‘live’ cracks and expansion or construction joints in waterproofing applications.
Intercrete 4872 is a permanently elastomeric composite tape exhibiting over 600% elongation which enables rapid application of the INTERCRETE range.
Provides excellent weathering resistance and is highly tolerant of a wide range of chemicals and is impermeable to water under 10 bar hydrostatic pressure (100m head of water).
Specifically designed for the general purpose structural repair and reinstatement of concrete in single coat applications up to 80mm in a single layer.
Intercrete 4800 offers low permeability to water at 10 bar positive and negative pressure along with excellent resistance to carbon dioxide gas and chloride ion diffusion.
CE-marked in accordance with BS EN 1504-3, Class R3. Suitable for repair methods 3.1, 3.3, 7.1, 7.2 as
defined in BS EN 1504-3.
Intertherm 2205 is a specialist temperature resistant maintenance coating, designed to resist corrosion under insulation (CUI) and high temperatures up to 230°C (446°F). Based on innovative, hot spread epoxy technology Intertherm 2205 shows excellent application characteristics and can be brush applied to hand prepared, hot steel up to 205°C (401°F).
For polymer modification of sand and cement mortars to provide enhanced mechanical characteristics:
When mixed with cement, can be used as a primer and a bonding agent for polymer mortars, renders and screeds.
Can also be diluted with water to produce a primer for roof and deck applications in the clean water industry. WRAS Approved for use in contact with potable water.
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.
In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Corrosion & fire protection coatings for buildings
Coatings for abrasive and corrosive environments