Water and Waste

Product Applications

Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.

Filter by

Product Chemistry

Volume Solids

VOC(EPA Solvent)

Gloss Level

Number of Components

Attributes

Fire Type

Certifications

Fire Duration (minutes)

Water and Waste

Mining

Transportation and Pipeline

Buildings

Wind Power

Thermal Power

Onshore Oil and Gas facilities

Offshore Oil and Gasfacilities

Product Line

Range

Dry time

Low temperature Cure (5 Celsius)

Structural Repair

Temperature Resistance

Lining

Passive Fire Protection

160 Products

Enviroline 405HTR MR System

Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete. In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.

Interline 955 MR System

Interline 995 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete. In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.

Interline 984 MR System

Interline 984 MR is a reinforced chemcial resistant system. The system features a 100% volume high solids, two componentepoxy phenolic topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete. In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.

Intercrete 4816

Product Type
NOT TRANSLATED
Chemistry
Concrete Primer

Intercrete 4811 (formerly Bond-Prime)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Concrete Primer

Designed to be used to treat a range of substrates, including: Concrete Mortars and Renders, Masonry, Polyurethane Foam, Phenolic Board Existing Paints Plaster and Intercrete Concrete Repair Mortars. Intercrete 4811 enhances bond by combining penetration into the pore structure with a surface film-forming effect to produce a stabilised, sound surface ideal for treatment. Reacts with subsequently applied coatings to provide a chemical bond giving excellent adhesion and dries quickly without the release of hazardous solvents and can be overcoated after just 1 hour.

Intercrete 4854 (formerly Cemprotec EF Grit)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Aggregate

Specifically designed to be broadcast into the surface of INTERCRETE coatings to aid curing and provide a durable slip and abrasion resistant finish. INTERCRETE 4854 grit provides a hard-wearing, slip-resistant surface which will provide ultimate protection against foot traffic, wheelchair use, impact from heavy objects and attack from the elements.

Intercrete 4874 (formerly Cemprotec 2000-BJT)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Flexible Waterproof Sealing Tape

Supplied as a 100mm wide preformed strip on siliconised release paper, the backing strip is simply removed upon application. Non-toxic and approved for use in contact with potable water, Intercrete 4874 is ideal for use in a wide range of waterproofing applications, such as reservoirs, water tanks, roof slab and projects in enclosed locations where it is not suitable to use solvent-based or hot welded products

Intercrete 4875 (formerly Cemprotec Scrim)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Flexible Waterproof Sealing Tape

Supplied in two grades for the reinforcement of the Flexcrete range of cementitious mortars and coatings: INTERCRETE SCRIM: Particularly suited for general reinforcement over large areas of cracking/crazing or weak/friable substrates, particularly insulation, to provide increased tensile strength and impact resistance. INTERCRETE EDGE SCRIM: For localised reinforcement over joints or cracks to provide increased tensile strength. Can also be used over welds or edges of steel sections to help maintain correct film thickness. Self-adhesive.

Intercrete 4873 (formerly Cemprotec GE080)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Mat Fibre Reinforcement - eng

Specifically designed as a general reinforcement for elastomeric cementitious coatings such as Intercrete 4842, particularly on roofs or other areas of cracked concrete where further movement is possible. It provides additional toughness to the film whilst still maintaining a high degree of flexibility

Intercrete 4815 (formerly Biodex Wash)

Specifically designed to kill active mould, fungal and bacterial spores and organisms such as lichen and algae, prior to the application of primers, coatings and repair mortars in the Intercrete range. Unlike many conventional systems, Intercrete 4815 remains active after its initial application, guarding against subsequent infection for up to two years. It is supplied in a concentrate form.

Pages