Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.
A single component, spray applied insulation coating based upon waterborne acrylic technology, Intertherm 3350 is suitable for use on substrates operating up to 177°C (350°F). Combining superior thin film insulation performance with easy application, Intertherm 3350 can improve productivity and minimize energy loss. Where suitable, Intertherm 3350 provides a seamless adherent insulating film enabling the removal of equipment from a corrosion under insulation (CUI) inspection program and mitigating a facility's overall CUI exposure.
Enviroline 405HTR offers high temperature performance alongside a wide ranging chemical resistance, for increased operational flexibility. Formulated with innovative polycyclamine technology, Enviroline 405HTR is a low VOC novolac epoxy lining that allows rapid return to service in just 14 hours, minimizing process disruption and reducing overall installation costs. Enviroline 405HTR offers high temperature resistance to 150°C (302°F) in a variety of cargoes including crude oil and produced water.
Early handling properties make Intergard 251HS an ideal primer for speeding up production and throughput. The need to thin is eliminated leading to even more cost savings and productivity benefits. Intergard 251HS is a two component, low VOC, high-solids fast curing epoxy primer containing zinc phosphate anticorrosive pigmentation.
A single component, intermediate temperature finish based on temperature resistant silicone and acrylic resins with thermally stable pigmentation.Intertherm 1875has excellent brush and roll characteristics.
Supplied as a single component, fibre reinforced, fast setting cement based repair mortar.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative. * Please note this product is only available in North America.
Supplied as a single component, fibre reinforced, waterproof screed or fairing coat.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative. * Please note this product is only available in North America.
Supplied as a single component, fibre reinforced, high build cement based repair mortar.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative. * Please note this product is only available in North America.
A single component, water based acrylic curing membrane designed for use with the Intercrete repair and protection systems. *Selective Countries Only - Please contact your local representative. * Please note this product is only available in North America.
A single component, water based acrylic primer designed to stabilise and seal concrete floors prior to the application of Intercrete products. *Selective Countries Only - Please contact your local representative. * Please note this product is only available in North America.
A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the protection of concrete substrates.Intercrete 4851 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative. * Please note this product is only available in North America.
Corrosion & fire protection coatings for buildings
Coatings for abrasive and corrosive environments