A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the levelling and protection of concrete substrates.Intercrete 4852 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative. * Please note this product is only available in North America.

Intercrete 4890 is a single pack, low VOC, water-based, modified styrene acrylic copolymer decorative concrete coating that provides excellent protection against carbonation and water ingress without entrapping moisture within damp substrates. Elastomeric properties enable the system to accommodate hairline cracks and substrate movement while providing lasting protection. Adhesion is excellent to mineral substrates. * Please note this product is only available in North America.

A two-component, high solids and high build polyamine-cured epoxy.

A single component, rapid drying modified alkyd primer/finish, designed to provide both anti-corrosive properties and a decorative finish in a single coat.

A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.

A two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties.

A revolutionary reinforced PVB single pack primer combining in one application etching and pre- treatment qualities for the preparation of ferrous and non-ferrous surfaces. This product has UK welding and Health certificates

A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.Available in colours as well as aluminium and glass flake versions with passivator, to provide additional anti-corrosive barrier protection.

Interzinc 125 is a self curing ethyl silicate based zinc rich coating with the zinc powder incorporated into the liquid component to give a single pack product.This product complies with the composition and performance requirements of SSPC Paint 20 and is characterised by excellent anticorrosive properties and easy application.

A single component, water based paint disbonder designed to remove coating residues from metallic substrates.Can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.