A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
Primer
Intergard 1032
A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
Grout
Ceilcote 748 Corrosion Grout
CEILCOTE 748 Corrosion Grout is a three-component chemicalresistant epoxy grouting material. It provides high strength, good adhesion to concrete and steel, minimal shrinkage and resists degradation by corrosive chemicals.
Primer
Interdur 8805
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Finish
Devthane 379
A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
Structural Concrete- Repair and Protection
Intercrete 4804 (formerly Marine Mortar S)
A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
Reference
Ceilcote 610 Ceilpatch
Ceilcote 610 Ceilpatch is a chemical-resistant epoxy patching/filling compound that is used to fill defects in concrete or steel surfaces prior to the application of Ceilcote lining, coating or flooring systems. It provides excellent adhesion to concrete or steel, minimal shrinkage and superior chemical resistance.
Temperature Resistance
Intertherm 50
A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
Primer
Interzinc 2277
Part of the Interzinc 22 series of products.A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 2Available in ASTM D520, Type II zinc dust version as standard.
Lining
Interline 955
A two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.A chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
Chemical Resistant Lining
Ceilcote 140 Flakeline
Ceilcote 140 Flakeline is a heavy duty, glass flake reinforced, chemically resistant vinyl ester lining for protection of steel against aggressive chemicals in immersion service. Uses Ceilcote #2 Hardener.
Finish
Devgrip 238
Devgrip 238 is a two component, abrasion resistant epoxy coating. *Please note this product is only available in North America.
Temperature Resistance
Intertherm 228HS
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
Intermediate
Interdur 8842
A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Structural Concrete- Repair and Protection
Intercrete 4874 (formerly Cemprotec 2000-BJT)
A high performance butyl tape which is designed to join two pieces of Intercrete 4872 waterproof composite tape together. Embedded into our Intercrete range of cementitious coatings, it forms an elastomeric joint between two lengths of tape to accommodate movement.