Lining
Interline 961
A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
BACK TO PRODUCTS
Water and Waste
Product Applications
Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.
Filter by
Products
My Filters
Reference
Ceilcote 610 Ceilpatch
Ceilcote 610 Ceilpatch is a chemical-resistant epoxy patching/filling compound that is used to fill defects in concrete or steel surfaces prior to the application of Ceilcote lining, coating or flooring systems. It provides excellent adhesion to concrete or steel, minimal shrinkage and superior chemical resistance.
Lining
Interline 955
A two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.A chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
Intermediate
Interdur 8842
A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Lining
Enviroline 2405
An ultra high solids, two component polycyclamine cured lining system utilising advanced epoxy technology, designed for single-leg application.
Structural Concrete- Repair and Protection
Intercrete 4842
A two component, polymer modified, elastomeric cementitious coating for the protection of concrete and masonry which exhibits cracking and where further movement is expected. *Selective Countries Only - Please contact your local representative.
Primer
Ceilcote 680 Primer
Ceilcote 680 Primer is a low viscosity epoxy primer for steel and concrete, with low temperature cure and a degree of tolerance to surface moisture.
Primer-Finish
Interseal 738
A two component, low VOC, high solids epoxy, pigmented with aluminium to provide enhanced corrosion resistance.
Chemical Resistant Lining
Ceilcote 242LSE flakeline
CEILCOTE 242 LSE Flakeline coating is a low surface energy, flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
Temperature Resistance
Intertherm 715
A functional coating for identification of hot spots and internal insulation failures, Intertherm 715 exhibits a visual color change in response to temperature rise. Based upon modified silicone technology, Intertherm 715 is a single component coating ideal for use on reaction vessels on chemical and petrochemical sites as a warning of dangerous temperature increases.
Structural Concrete- Repair and Protection
Intercrete 4814 (formerly Monosil)
A single component, water-based (VOC free), mixture of silane, siloxane and synthetic resins which imparts maximum water and oil repellency to mineral substrates. It penetrates the surface pores to minimise its effect on the appearance of the substrate and has minimal effect on the water vapour diffusion characteristics.